Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-1094083.png)
(a) Disconnect the H2 main body ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO MAIN BODY ECU (CANH, CANL)
OK -- REPLACE MAIN BODY ECU
33. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (SKID CONTROL ECU)
(a) Disconnect the A19 skid control ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
