Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(c) Remove the 3 bolts and charcoal canister assembly.
4. REMOVE FUEL TANK VENT HOSE SUB-ASSEMBLY
(a) Push the hose firmly toward the canister side.
(b) Pinch the hose (portion A) as shown in the illustration.
(c) Pull out the hose.
NOTICE:
-
Do not use any tools in this procedure.
-
Check for any dirt and foreign matter contamination in the canister and around the hose. Clean if necessary. Foreign matter may damage
the O-rings or cause leaks in the seal between the canister and hose.
5. REMOVE CHARCOAL CANISTER BASE BRACKET
(a) Disconnect the No. 2 canister outlet hose sub-assembly.
(1) Push the hose firmly toward the canister side.
(2) Pinch the hose (portion A) as shown in the illustration.
(3) Pull out the hose.
NOTICE:
-
Do not use any tools in this procedure.
-
Check for any dirt and foreign matter contamination in the canister and around the hose. Clean if necessary. Foreign matter may damage
the O-rings or cause leaks in the seal between the canister and hose.
(b) Remove the charcoal canister filter sub-assembly.
(c) Disconnect the charcoal canister outlet hose from hose clamp.