Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Fuel Pump Control Unit: Service and Repair
Installation
3UR-FE FUEL: FUEL PUMP ECU: INSTALLATION
INSTALLATION
1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY
(a) Install the fuel pump control ECU assembly with the 2 bolts.
Torque: 20 Nm (199 kgf-cm, 14 ft-lbf)
NOTE: Do not use the fuel pump control ECU assembly if it has been subjected to physical shocks such as being dropped, etc.
(b) Connect the 2 fuel pump control ECU connectors.