Toyota Workshop Service and Repair Manuals

Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Removal

3UR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal
2. DRAIN ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair

3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

(a) Disconnect the sensor connector.
(b) Using a 19 mm deep socket wrench, remove the sensor.
(c) Remove the gasket from the sensor.