Sequoia 4WD V8-5.7L (3UR-FE) (2009)
JF3A TRANSFER / 4WD / AWD: 4WD CONTROL SWITCH: REMOVAL
REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH
(a) Remove the front door scuff plate RH
HINT: Use the same procedure for the LH side.
2. REMOVE COWL SIDE TRIM BOARD LH
(a) Remove the front cowl side trim board RH
HINT: Use the same procedure for the LH side.
3. REMOVE INSTRUMENT SIDE PANEL LH
(a) Remove the instrument side panel RH
HINT: Use the same procedure for the LH side.
4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release
Cable/Service and Repair/Removal
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
(a) Remove the lower instrument panel finish panel sub-assembly RH
HINT: Use the same procedure for the LH side.
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
7. REMOVE 4WD CONTROL SWITCH
(a) Detach the 3 claws to remove the switch.
Installation
JF3A TRANSFER / 4WD / AWD: 4WD CONTROL SWITCH: INSTALLATION
INSTALLATION
1. INSTALL 4WD CONTROL SWITCH
(a) Attach the 3 claws to install the switch.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
4. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release
Cable/Service and Repair/Installation