Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-155004.png)
1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
(a) Install the ultrasonic sensor retainer to the rear bumper.
NOTE: Do not damage the bumper with the snap when installing the retainer.
HINT: When installing the retainer, align the keyhole and snap as shown in the illustration.
2. INSTALL NO. 1 ULTRASONIC SENSOR
(a) Engage the 2 claws and install the ultrasonic sensor.
(b) Connect the sensor connector.
3. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
(a) Install the ultrasonic sensor retainer to the rear bumper.
NOTE: Do not damage the bumper with the snap when installing the retainer.
HINT: When installing the retainer, align the keyhole and snap as shown in the illustration.
4. INSTALL NO. 2 ULTRASONIC SENSOR
