Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-208002.png)
SEAT: POWER SEAT SWITCH (for Rear No. 2 Seat): REMOVAL
REMOVAL
1. REMOVE QUARTER TRIM COVER RH
(a) Disengage the 2 claws and the 2 guides and remove the quarter trim cover.
(b) Disconnect the 2 connectors.
2. REMOVE REAR POWER SEAT SWITCH (for RH Side)
(a) Disengage the 2 claws and remove the rear power seat switch.
3. REMOVE FOLD SEAT SWITCH ASSEMBLY (for RH Side)
(a) Disengage the 2 claws and remove the fold seat switch assembly.
4. REMOVE QUARTER TRIM COVER LH
HINT: Use the same procedure for the RH side and LH side.
5. REMOVE REAR POWER SEAT SWITCH (for LH Side)
HINT: Use the same procedure for the RH side and LH side.
6. REMOVE FOLD SEAT SWITCH ASSEMBLY (for LH Side)
HINT: Use the same procedure for the RH side and LH side.
7. REMOVE QUARTER TRIM REAR COVER LH (for Luggage Compartment)
