Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Power Seat Switch: Testing and Inspection
Power Seat Switch (for Rear No. 2 Seat)
SEAT: POWER SEAT SWITCH (for Rear No. 2 Seat): INSPECTION
INSPECTION
1. INSPECT REAR POWER SEAT SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the switch.
(b) Apply battery voltage to the switch connector, and check that the rear power seat switch illuminates.
OK:
If the result is not as specified, replace the switch.