Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-246005.png)
(b) Engage the claw and install the No. 3 side trim base with back door control switch onto the rear window side garnish assembly LH.
(c) Install the screw.
2. INSTALL REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
4. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
5. INSTALL REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
6. INSTALL ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
8. INSTALL REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
10. INSTALL REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
11. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Manual Seat)
(a) Remove the rear No. 2 seat assembly LH See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly (for Manual Seat Type LH
Side)/Installation.
13. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the rear No. 2 seat assembly LH See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly (for Power Seat Type LH
Side)/Installation.
14. INSTALL DECK BOARD BRACKET See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
15. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
16. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
17. INSTALL ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
18. INSTALL LUGGAGE COMPARTMENT TRIM BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
