Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Camshaft Position Sensor: Service and Repair
Installation
3UR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION
INSTALLATION
1. INSTALL VVT SENSOR
(a) Install the 4 sensors with the 4 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the 4 sensor connectors.
2. INSTALL CAMSHAFT POSITION SENSOR
(a) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the sensor connector.
3. INSTALL AIR CLEANER HOSE ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation
4. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation