Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Wiper Switch: Service and Repair
Removal
WIPER / WASHER: WIPER SWITCH: REMOVAL
REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
2. REMOVE COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
3. REMOVE INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal
5. REMOVE LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)
(a) Turn the ignition switch to ON. Operate the tilt and telescopic switch to fully extend and lower the steering column.
(b) While turning the steering wheel to the right and left, remove the 2 screws and the lower steering column cover.
(c) Disengage the 2 claws to remove the lower steering column cover.
NOTE: Do not damage the tilt and telescopic switch.
6. REMOVE LOWER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)
(a) Operate the tilt and telescopic lever to fully extend and lower the steering column.
(b) While turning the steering wheel to the right and left, remove the 2 screws and the lower steering column cover.
(c) Disengage the 2 claws to remove the lower steering column cover.