Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-1803001.png)
Auxiliary Power Outlet Switch: Service and Repair
Removal
POWER OUTLETS (INT): INVERTER MAIN SWITCH: REMOVAL
REMOVAL
1. REMOVE NO. 2 SWITCH HOLE BASE
(a) Using a moulding remover, disengage the 4 claws and remove the No. 2 switch hole base.
2. REMOVE INVERTER MAIN SWITCH
(a) Disconnect the connector.
(b) Disengage the 2 claws and remove the inverter main switch.
