Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-1740001.png)
Ignition Switch: Service and Repair
Installation
3UR-FE STARTING: IGNITION SWITCH: INSTALLATION
INSTALLATION
1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY
(a) Attach the 2 claws to install the ignition or starter switch assembly.
(b) Connect the ignition or starter switch assembly connector.
2. INSTALL LOWER STEERING COLUMN COVER See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and
Modules - Steering/Steering Column Control Module/Service and Repair/Installation
3. CUSTOMIZE INFORMATION (for Power Tilt and Power Telescopic Steering Column) See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Removal and Replacement/Steering Column Assembly (for Power Tilt and Power Telescopic Steering
Column)/Removal
