Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-2009004.png)
8. REMOVE VANE PUMP ASSEMBLY
(a) Remove the 2 bolts and vane pump assembly.
Installation
POWER ASSIST SYSTEMS: VANE PUMP (for 3UR-FE, 3UR-FBE): INSTALLATION
INSTALLATION
1. INSTALL VANE PUMP ASSEMBLY
(a) Install the vane pump with the 2 bolts.
Torque: 28 Nm (286 kgf-cm, 21 ft-lbf)
2. CONNECT PRESSURE FEED TUBE
(a) Install a new gasket to the pressure feed tube.
(b) Install the pressure feed tube with the union bolt.
Torque: 51 Nm (520 kgf-cm, 38 ft-lbf)
3. CONNECT SOLENOID VALVE CONNECTOR
(a) Connect the solenoid valve connector.
