Sequoia 4WD V8-5.7L (3UR-FE) (2009)
4. CONNECT POWER STEERING OIL PRESSURE SENSOR CONNECTOR
(a) Connect the oil pressure sensor connector.
5. CONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE
(a) Connect the hose with the clip.
6. CONNECT HARNESS BRACKET
(a) Install the bracket with the bolt.
7. INSTALL RADIATOR ASSEMBLY
(a) Install the radiator assembly.
HINT:
-
for 3UR-FE See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Installation
-
for 3UR-FEB See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Installation
8. ADD POWER STEERING FLUID
9. BLEED POWER STEERING FLUID See: Testing and Inspection/Component Tests and General Diagnostics/Power Steering System/On-Vehicle
Inspection
10. INSPECT FOR POWER STEERING FLUID LEAK