toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering Control Module > < Components|Page 6661
Page 2
background image

(c) Install the 2 screws.

HINT:  Turn the steering wheel to the right and left as necessary to install the 2 screws.

8. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Diagnosis System.

9. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTE:  When disconnecting the cable, some systems need to be initialized after the cable is reconnected  See: Testing and
Inspection/Programming and Relearning.

Steering Control Module > < Components|Page 6661