Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(b) Using a union nut wrench, disconnect the pressure feed tube (pressure feed tube side) from the power steering gear.
(c) Remove the 2 bolts and disconnect the pressure feed tube clamp.
8. REMOVE POWER STEERING GEAR ASSEMBLY
(a) Remove the 2 bolts, 2 nuts and power steering gear.
NOTE: Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut fixed.
Installation
STEERING GEAR / LINKAGE: STEERING GEAR: INSTALLATION
INSTALLATION
1. INSTALL POWER STEERING GEAR ASSEMBLY