Sequoia 4WD V8-5.7L (3UR-FE) (2009)
2. INSTALL FRONT NO. 2 LOWER ARM LH
(a) Using SST and a press, press in a new bush.
SST: 09710-26011
09710-05081
NOTE: Press the bush while making sure the bush positioning protrusions are perpendicular to the lower arm, as shown in the illustration.
3. INSTALL FRONT NO. 1 LOWER ARM BUSH LH
(a) Using SST and a press, press in a new bush.
SST: 09223-00010
SST: 09612-30012
4. INSTALL FRONT LOWER BALL JOINT ATTACHMENT LH
(a) Install the attachment with the nut and a new cotter pin.
Torque: 167 Nm (1703 kgf-cm, 123 ft-lbf)
NOTE: If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.
Disassembly
FRONT SUSPENSION: FRONT UPPER SUSPENSION ARM: DISASSEMBLY
DISASSEMBLY
1. REMOVE FRONT SUSPENSION UPPER ARM BUSH
(a) Using a hammer and chisel, strike and bend the entire flange of the upper arm bush as shown in the illustration.