Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-2083001.png)
Ride Height Sensor: Service and Repair
Removal
SUSPENSION CONTROL: HEIGHT CONTROL SENSOR: REMOVAL
REMOVAL
1. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a) Put matchmarks on the rear height control sensor link and bracket.
(b) Remove the nut and disconnect the rear height control sensor link.
(c) Disconnect the rear height control sensor connector.
(d) Remove the nut and the rear height control sensor.
