Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Compressor/Pump: Service and Repair
Removal
SUSPENSION CONTROL: HEIGHT CONTROL COMPRESSOR: REMOVAL
REMOVAL
1. REMOVE REAR BUMPER COVER See: Body and Frame/Bumper/Rear Bumper/Service and Repair/Removal
2. REMOVE HEIGHT CONTROL NO. 1 COMPRESSOR
(a) Remove the 3 clips and compressor cover.
(b) Disconnect the hose.
(c) Disconnect the 2 wire harness connectors.
(d) Disconnect the height control tube See: Service Precautions/Suspension Control System.
(e) Remove the 3 bolts and height control compressor.
3. REMOVE HEIGHT CONTROL FILTER
(a) Disconnect the 2 hoses.
(b) Remove the 2 bolts and the height control filter.
4. REMOVE HEIGHT CONTROL COMPRESSOR BRACKET
(a) Disconnect the 3 wire harness clamps.