Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Suspension Strut / Shock Absorber: Overhaul
Disassembly
FRONT SUSPENSION: FRONT SHOCK ABSORBER: DISASSEMBLY
DISASSEMBLY
1. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
(a) Using SST, compress the coil spring.
SST: 09727-30021
NOTICE:
-
Make sure that the suspension support is free from the coil spring.
-
Do not compress the coil spring more than necessary.
-
Do not use an impact wrench. It will damage SST.
-
Do not place yourself over the top of the shock absorber.
CAUTION: Be careful as the coil spring may spring upward and cause an injury.
(b) Remove the front support to front shock absorber nut.
2. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH
(a) Remove the suspension support, 2 retainers and 2 cushions from the shock absorber rod (w/o AVS).
(b) Remove the suspension support, 2 retainers, 2 cushions and collar from the shock absorber rod (w/AVS).
3. REMOVE FRONT COIL SPRING LH
(a) Remove the coil spring from the shock absorber.
Reassembly
FRONT SUSPENSION: FRONT SHOCK ABSORBER: REASSEMBLY
REASSEMBLY
1. INSTALL FRONT COIL SPRING LH