Sequoia 4WD V8-5.7L (3UR-FE) (2009)
REMOVAL
1. REMOVE FRONT CONSOLE BOX ASSEMBLY
(a) Remove the front console box assembly See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front Console
Box/Removal.
2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Move the shift lever to N.
(b) Disconnect the transmission control cable end from the shift lever.
(c) Remove the clip and disconnect the transmission control cable from the shift lever retainer.
3. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
(a) Disconnect the clamp and 2 connectors.
(b) Remove the 4 bolts and transmission floor shift assembly.
Installation
AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSTALLATION
INSTALLATION
1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY