Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(b) Remove the 3 bolts and transmission oil cooler with transmission oil thermostat.
(c) Separate the transmission oil cooler from the transmission oil thermostat.
(d) Remove the 4 O-rings.
Installation
AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: OIL COOLER: INSTALLATION
INSTALLATION
1. INSTALL TRANSMISSION OIL COOLER ASSEMBLY (w/o Trailer Towing System)
(a) Coat 4 new O-rings with ATF.
(b) Install the 4 O-rings, transmission oil cooler spacer and transmission oil cooler to the automatic transmission.
(c) Temporarily install the bolt A.
(d) Install the 2 bolts B and tighten them to the specified torque. Then tighten bolt A to the specified torque.
Torque: 21 Nm (214 kgf-cm, 16 ft-lbf)
2. INSTALL TRANSMISSION OIL COOLER ASSEMBLY (w/ Trailer Towing System)