Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(c) Install the 19 bolts.
Torque: 11 Nm (112 kgf-cm, 8 ft-lbf)
HINT: Each bolt length is indicated below.
36 mm (1.42 in.) for bolt A
25 mm (0.984 in.) for bolt B
45 mm (1.77 in.) for bolt C
50 mm (1.97 in.) for bolt D
(d) Install the detent spring and detent spring cover with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
2. CONNECT TRANSMISSION WIRE See: Wiring Harness/Service and Repair/Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Wiring Harness/Service and Repair/Installation
4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY See: Wiring Harness/Service and Repair/Installation
5. ADD AUTOMATIC TRANSMISSION FLUID See: Service and Repair/Removal and Replacement/Transmission Assembly/Installation
6. ADJUST AUTOMATIC TRANSMISSION FLUID
(a) Adjust automatic transmission fluid See: Service and Repair/Procedures.
7. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK