Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-1469015.png)
(a) Using SST and a hammer, lightly tap in the bearing (inner race) to install it.
SST: 09316-60011
09316-00041
18. INSTALL FRONT DIFFERENTIAL DRIVE PINION OIL SLINGER
19. INSPECT DIFFERENTIAL DRIVE PINION PRELOAD
(a) Using SST, install the companion flange.
SST: 09950-30012
09951-03010
09953-03010
09954-03010
09955-03030
09956-03020
(b) Coat the threads of the nut with hypoid gear oil.
(c) Using SST to hold the companion flange.
SST: 09330-00021
09330-00030
(d) Tighten the nut until the standard preload is reached.
Torque:
451 N*m (4599 kgf*cm, 332 ft.*lbf) or less
NOTE: As there is no spacer, tighten the nut a little at a time, being careful not to overtighten it.
(e) Using a torque wrench, measure the preload of the backlash between the drive pinion and ring gear.
Standard Preload (at Starting):
