Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(a) Using a chisel and hammer, stake the nut.
SST: 09930-00010
38. INSTALL REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL
(a) Apply MP grease to 2 new oil seals.
(b) Using SST and a hammer, tap in the 2 oil seals.
SST: 09223-15020
SST: 09950-70010
09951-07150
NOTE: Make sure that the oil seal are installed in the proper locations.
Standard oil seal depth:
-0.50 to 0.50 mm (-0.0197 to 0.0197 in.)