Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(a) Remove the 2 bolts and heat insulator from the heat insulator bracket.
2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
(a) Place matchmarks on the differential and propeller shaft flange.
(b) Place matchmarks on the transfer and propeller shaft flanges.
(c) Remove the 8 nuts and 8 washers and remove the front propeller shaft assembly.
Installation
DRIVE SHAFT / PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL FRONT PROPELLER SHAFT
(a) Align the matchmarks on the differential and propeller shaft flange.
(b) Align the matchmarks on the transfer and propeller shaft flange.