Sequoia 4WD V8-5.7L (3UR-FE) (2009)
2. Inspect the front driveshaft (propeller shaft assembly) for a loose parts label that may be contacting other components (see Figure 1).
Is the label on the front driveshaft (propeller shaft assembly) loose and contacting other components?
^
YES - Go to step 3.
^
NO - This TSB does NOT apply. Continue diagnosis to isolate the cause of this condition.
3. Completely remove the front driveshaft parts label.
4. Test drive and confirm there is no abnormal noise present when in 4WD.