Sequoia 4WD V8-5.7L (3UR-FE) (2009)
20. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING
HINT: Use the same procedure as for the LH side .
21. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP
HINT: Use the same procedure as for the LH side .
22. REMOVE REAR DOOR GLASS RUN See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
23. REMOVE REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Service and Repair/Disassembly
24. REMOVE REAR DOOR WINDOW FRONT GUIDE SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Service and Repair/Disassembly
25. REMOVE REAR DOOR GLASS SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
26. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service
and Repair/Disassembly
27. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY
(a) Using "TORX" socket wrench T25, remove the 3 screws and the power window regulator motor.