Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Headlamp Washer Motor: Service and Repair
Removal
WIPER / WASHER: HEADLIGHT CLEANER ACTUATOR: REMOVAL
REMOVAL
HINT:
-
Use the same procedure for both sides.
-
The procedure described below is for the LH side.
1. REMOVE FRONT END PANEL See: Lighting and Horns/Headlamp/Service and Repair/Removal
2. REMOVE HEADLIGHT ASSEMBLY See: Lighting and Horns/Headlamp/Service and Repair/Removal
3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY
(a) Remove the 3 screws and headlight washer actuator sub-assembly LH.