Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1804001.png)
Center Mounted Brake Lamp: Testing and Inspection
W/ Rear Spoiler
INSPECT HI-MOUNTED STOP LIGHT ASSEMBLY CONTINUITY
Using the ohmmeter,check that continuity exists between terminal 1 and terminal 2.
If continuity is not as specified,replace the light assembly or bulb.
W/ Rear Spoiler
INSPECT HI-MOUNTED STOP LIGHT ASSEMBLY CONTINUITY
Using the ohmmeter,check that continuity exists between terminal 1 and terminal 2.
If continuity is not as specified,replace the light assembly or bulb.
