Sienna V6-3.0L (1MZ-FE) (2003)
REMOVAL
1. REMOVE AIR CLEANER ASSEMBLY
2. DISCONNECT BRAKE LINES
Using SST; disconnect the 6 brake lines from the ABS actuator.
SST 09023-00100, 09023-38200
Torque:
10 mm nut: 15.2 N.m (155 kgf.cm, 11 ft.lb)
12 mm nut: 19.6 N.m (200 kgf.cm, 14.5 ft.lb)
3. REMOVE ABS ACTUATOR
(a) Disconnect the connector.
(b) Remove the 3 nuts and ABS actuator assembly.
(c) Remove the 4 nuts and bracket.