Sienna AWD V6-3.3L (3MZ-FE) (2004)
Collision Avoidance Module: Service and Repair
DISTANCE CONTROL ECU ASSY
REPLACEMENT
1. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSY
2. REMOVE GLOVE COMPARTMENT DOOR ASSY
3. REMOVE STEREO COMPONENT AMPLIFIER ASSY (W/ STEREO COMPONENT AMPLIFIER)
4. REMOVE DISTANCE CONTROL ECU ASSY
a. Remove the bolt.
b. Disengage the clip and remove the distance control ECU assy.
5. INSTALL DISTANCE CONTROL ECU ASSY
a. Using a torque wrench, install the bolt.
Torque: 5 Nm (51 kgf.cm, 44 in.lbf)
NOTE: Do not install the dropped or shocked distance control ECU assy.