Sienna AWD V6-3.3L (3MZ-FE) (2004)
1. REMOVE THE CLIP AND THE DRIVER'S SIDE CENTER CONSOLE TRIM PANEL
a) Remove destroy and discard the old clip.
b) Remove destroy and discard the NG center console trim panel.
2. INSTALL THE NEW DRIVER'S SIDE CENTER CONSOLE TRIM PANEL
a) Install the NEW center console trim panel.
NOTE:
Make sure the two attachments points at the rear of the center console trim panel are properly seated.
b) Install the NEW clip.
NOTE:
Make sure the new clip is fastened correctly and fully installed by pressing on it firmly.
VI. Recalled Parts Disposal
Please make sure all recalled parts (original parts) removed from the vehicle are disposed of in a manner in which they will not be reused.