Sienna AWD V6-3.3L (3MZ-FE) (2004)
2.
Install back door stay sub-assembly.
A.
Install the back door stay sub-assembly with the bolt to the door panel (mounting point B).
For door side:
Torque: 19.5 N.m (200 kgf.cm, 14 ft.lbf)
B.
Install the bracket with the 2 bolts to the body panel (mounting point A).
C.
Install the stay to the bracket by engaging the stay clip onto the bracket.
For body side:
Torque: 17.5 N.m (180 kgf.cm, 13 ft.lbf)
3.
Dispose of previous back door stay sub-assembly.
A.
Horizontally fix the stay in a vise with the piston-rod pulled out.
B.
Wearing safety glasses, gradually cut between A and B as shown in the illustration using a metal saw to gradually release the gas.
Dimensions: