Sienna AWD V6-3.3L (3MZ-FE) (2004)
/Page-1079002.png)
10. REMOVE REAR FLOOR SEAT LOCK COVER
11. REMOVE PARKING BRAKE CONTROL PEDAL ASSY
a. Remove the 4 nuts and separate the instrument panel junction block assy w/wiring harness connector from the body.
b. Disconnect the parking brake switch connector.
c. Remove the bolt, 2 nuts and parking brake control pedal assy.
12. REMOVE PARKING BRAKE PEDAL BRACKET PROTECTOR
a. Using a flat-head screwdriver, disengage the 2 claws on the Parking Brake Pedal Bracket Protector.
b. Turning the Parking Brake Pedal Bracket Protector clockwise, remove the Parking Brake Pedal Bracket Protector from the Parking Brake
Control Pedal.
13. REMOVE PARKING BRAKE CABLE ASSY NO.1
14. REMOVE PARKING BRAKE SWITCH ASSY
a. Remove the screw and parking brake switch.
15. INSTALL PARKING BRAKE SWITCH ASSY
a. Install the parking brake switch to the parking brake pedal with the screw.
16. INSTALL PARKING BRAKE CABLE ASSY NO.1
17. INSTALL PARKING BRAKE PEDAL BRACKET PROTECTOR
a. Fit the convex part on a new Parking Brake Pedal Bracket Protector into the concave part on the Parking Brake Control Pedal and turn the
