Sienna AWD V6-3.3L (3MZ-FE) (2004)
c. Install the correct side shim with a new C-washer.
d. Remeasure the clearance.
14. INSTALL PARKING BRAKE SHOE ASSY LH NO.2
a. Using needle-nose pliers, connect the parking brake cable No.3 to the parking brake shoe lever.
b. Install the parking brake shoe assy LH No.2 with the shoe hold-down compression spring pin No.2, shoe holddown compression spring and 2
cups.
15. INSTALL PARKING BRAKE SHOE ADJUSTING SCREW SET
a. Apply the high temperature grease to the adjusting bolt.
b. Install the parking brake shoe adjusting screw set LH.
16. INSTALL PARKING BRAKE SHOE STRUT LH
17. INSTALL PARKING BRAKE SHOE ASSY LH NO.1
a. Install the parking brake shoe assy LH No.1 with the shoe hold-down compression spring pin No. 1, shoe holddown compression spring and 2
cups.
b. Install the tension spring and 2 shoe return tension springs.