Sienna AWD V6-3.3L (3MZ-FE) (2004)
b. Install a new gasket to the exhaust pipe front as shown in the illustration.
c. Install the exhaust pipe center to the 2 exhaust pipe supports.
d. Tighten the 2 compression springs and the 2 bolts.
Torque: 43 Nm (438 kgf-cm, 32 ft. lbs.)
8. INSTALL EXHAUST PIPE ASSY TAIL
a. Install a new gasket and the exhaust pipe tail to the 3 exhaust pipe supports.
b. Tighten the 2 bolts.
Torque: 43 Nm (438 kgf-cm, 32 ft. lbs.)
9. INSTALL HEATED OXYGEN SENSOR
Torque: 44 Nm (450 kgf-cm, 33 ft. lbs.)
10. CHECK FOR EXHAUST GAS LEAKS
11. INSTALL FLOOR CARPET COVER CENTER LH