Sienna AWD V6-3.3L (3MZ-FE) (2004)
Alignment: Technical Service Bulletins
Suspension - Wheel Alignment Specifications
SUSPENSION
SU008-06
Title:
WHEEL ALIGNMENT SPECIFICATIONS
Models:
'04 - '06 Sienna
December 21, 2006
Introduction
The purpose of this bulletin is to provide all necessary suspension alignment measurement and confirmation specifications in one document. The
following specifications should be used in place of those contained in your alignment equipment if a discrepancy is discovered.
1.
Tire Pressure Specifications
2.
Vehicle Height Specifications
3.
Front Total Toe Specifications
4.
Front Wheel Angle Specifications
5.
Front Wheel Camber Specifications
6.
Front Wheel Caster Specifications
7.
Steering Angle Inclination (SAI) Specifications
8.
Rear Wheel Camber Specifications
9.
Rear Total Toe Specifications
10.
Repair Manual References
NOTE:
^
The rear total toe and vehicle height specifications listed in this bulletin may be different than those listed in the 2004, 2005, and 2006 model
year Sienna Repair Manuals. The values provided by this bulletin should be used if a discrepancy is discovered.
^
In some cases alignment equipment software may allow the user to change the values stored in the equipment. Using the equipment user manual,
determine whether your equipment has this capability and update the specifications, if applicable.
Applicable Vehicles
^
2004 - 2006 model year Sienna vehicles.
Warranty Information
Alignment Specifications
NOTE:
The tables in this TSB include alignment specifications in all possible units of measurement. Confirm that you are referring to the same units of
measurement in the chart as your alignment machine is displaying.