Sienna AWD V6-3.3L (3MZ-FE) (2004)
Drive Belt: Service and Repair
A/C Belt
V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
REPLACEMENT
1. REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Loosen the bolt C.
b. Loosen the bolt A.
c. Loosen the bolt B and remove the V (cooler compressor to crankshaft pulley)belt No.1.
2. INSTALL V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Temporarily install the V (cooler compressor to crankshaft pulley)belt No.1 as illustrated.
3. ADJUST V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Apply drive belt tension by turning the bolt B.