Sienna AWD V6-3.3L (3MZ-FE) (2004)
10. REMOVE FUEL SUCTION PLATE SUB ASSY
a. Using a screwdriver with the tip wrapped in tape, disconnect the 4 snap claws from the claw holes and remove the fuel suction plate.
NOTE: Do not damage the fuel suction plate and the fuel suction support No. 1.
11. REMOVE FUEL PUMP
a. Disconnect the fuel pump connector.
b. Using a small screwdriver with the tip wrapped in tape, disconnect the 2 claws from the claw holes and pull out the fuel pump.
NOTE: Do not damage the fuel pump and the fuel suction plate.
c. Remove the O-ring and the fuel pump spacer from the fuel pump.
12. REMOVE FUEL FILTER ASSY
a. Using a small screwdriver, pry out the clip.
b. Remove the fuel filter from the fuel pump.