Sienna AWD V6-3.3L (3MZ-FE) (2004)
e. Turn the lever counterclockwise until it stops, then turn it clockwise for 2 notches.
f.
Remove the control shaft lever.
g. Align the groove with the neutral basic line.
h. Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
i.
Using a screwdriver, stake the nut with the lock plate.
j.
Install the control shaft lever, washer and nut.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
k. Connect the park/neutral position switch connector.