Sienna AWD V6-3.3L (3MZ-FE) (2004)
(d) Install the new seatbelt bezel.
(e) Press down on the seatbelt bezel until the back side claw engages.
(f) Move the seatbelt to the side as shown in the illustration, and check that the seat cover material cannot be seen through the seatbelt bezel slot.
(g) Reinstall the screw.
(h) Reinstall the side clip.
(i) Reinstall the headrest.
(j) Confirm that the seatbelt retracts properly.
VII. SSC Completion Label Installation
VII. SSC COMPLETION LABEL INSTALLATION
After completing the repair and before returning the vehicle to the owner, an SSC completion label, which is enclosed in the owner's notification letter,
must be affixed to the left front door hinge post, near the check strap.
(a) The label is to be filled out as follows: