Sienna AWD V6-3.3L (3MZ-FE) (2004)
VI. Work Procedure
VI. WORK PROCEDURE
A. MIDDLE ROW SEATBELT BEZEL REPLACEMENT
1. REMOVE THE MIDDLE ROW SEATBELT BEZEL
(a) Remove the headrest
(b) Remove the side clip.
(c) Remove the screw.
(d) Using the nylon pry tools, disengage the claws for the front clip.
(e) Apply firm pressure to the back side of the seatbelt bezel where the claw is located. While applying pressure to this area push up to disengage the
seatbelt bezel from the claw.