Sienna AWD V6-3.3L (3MZ-FE) (2004)
(b) Relocate the seatbelt to the opposite side of the seatbelt guide.
(c) Using a pair of scissors, CAREFULLY cut along the line drawn, trimming off the shaded portion of the seatback cover ONLY. During this process
make sure to maintain a fabric bridge between the seat back cover hole and area to be trimmed off.
CAUTION:
^
DO NOT cut any portion of the rear seam located on the back edge of the seatback cover.
^
DO NOT cut more than this amount.
^
USE EXTREME CAUTION when cutting.
3. INSTALL THE NEW MIDDLE ROW SEATBELT BEZEL