Sienna AWD V6-3.3L (3MZ-FE) (2004)
/Page-251001.png)
Ignition Switch: Service and Repair
IGNITION OR STARTER SWITCH ASSY
REPLACEMENT
HINT: The installation is in the reverse order of the removal.
1. REMOVE STEERING COLUMN COVER LWR
2. REMOVE STEERING COLUMN COVER UPR
3. REMOVE IGNITION OR STARTER SWITCH ASSY
a. Disconnect the ignition switch connector and un-lock warning switch connector.
b. Remove the clamp.
c. Remove the 2 screws and ignition switch.
