Sienna AWD V6-3.3L (3MZ-FE) (2004)
/Page-1161002.png)
REPLACEMENT
1. REMOVE REAR DOOR SCUFF PLATE LH
2. REMOVE REAR DOOR WEATHERSTRIP LH
3. REMOVE BACK DOOR WEATHERSTRIP
4. REMOVE BACK DOOR SCUFF PLATE
5. REMOVE QUARTER TRIM PANEL ASSY FRONT LH
6. REMOVE VOLTAGE INVERTER ASSY
a. Disconnect the connector.
b. Remove the 2 bolts and the voltage inverter assy.
7. INSTALL VOLTAGE INVERTER ASSY
a. Install the voltage inverter assy with the 2 bolts.
Torque: 5.4 Nm (55 kgf.cm, 47 in.lbf)
NOTE: Tighten the bolts in order shown in the illustration to in the voltage inverter assy.
