Sienna AWD V6-3.3L (3MZ-FE) (2004)
C.
Place matchmarks on the steering intermediate shaft sub-assembly and steering gear assembly.
D.
Remove the bolt and disconnect the steering intermediate shaft sub-assembly.
2.
Remove the steering intermediate shaft sub-assembly.
A.
Place matchmarks on the steering sliding yoke sub-assembly and steering main shaft assembly.
B.
Remove the bolt and steering sliding yoke sub-assembly from the steering main shaft assembly.
3.
Place the corresponding matchmarks on the NEW steering intermediate shaft sub-assembly.
To place the matchmarks on the NEW steering intermediate shaft sub-assembly, place a NEW steering intermediate shaft next to the original
steering intermediate shaft assembly (removed in the previous step) and transfer those match marks to the same locations on the NEW steering