Sienna AWD V6-3.3L (3MZ-FE) (2004)
24. CONNECT SHOCK ABSORBER ASSY REAR LH
a. While raising the jack, connect the shock absorber assy rear LH to the rear axle beam assy.
b. Temporarily tighten the nut.
25. CONNECT SHOCK ABSORBER ASSY REAR RH
HINT: Connect the RH side by the same procedures as the LH side.
26. CONNECT REAR BRAKE TUBE NO.2
a. Install the flexible hose and clip.
b. Using SST, connect the brake tube to the flexible hose.
Torque: 15 Nm (153 kgf-cm, 11 ft. lbs.)
SST 09023-00100
c. Install the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
27. CONNECT REAR BRAKE TUBE NO.1
SST 09023-00100
HINT: Connect the RH side by the same procedures as the LH side.