Sienna AWD V6-3.3L (3MZ-FE) (2004)
/Page-1280001.png)
Wheel Bearing: Service and Repair
Rear Axle Hub & Bearing ASSY LH (FF) Replacement
REAR AXLE HUB & BEARING ASSY LH (FF)
REPLACEMENT
1. REMOVE REAR WHEEL
2. SEPARATE REAR DISC BRAKE CALIPER ASSY LH (DISC REAR BRAKE TYPE)
a. Removing the 2 bolts, separate the rear disc brake caliper assy LH.
NOTICE: Using a string and so on, hang down the disc brake caliper.
3. REMOVE REAR DISC (DISC REAR BRAKE TYPE)
4. REMOVE REAR BRAKE DRUM SUB-ASSY (DRUM REAR BRAKE TYPE)
5. SEPARATE SKID CONTROL SENSOR WIRE
